Proplate - One (1) Door Handle Protector - Rear Door Only 
Price: £28.50 (Excluding VAT at 17.5%)
Proplate - One (1) Door Handle Protector - Rear Door Only.
Proplate is a clever, innovative range of security products designed specifically to protect the vulnerable area surrounding a van door handle normally targeted by thieves.
Made from stainless steel and installed in minutes, this product requires no drilling as they are secured to the vehicle by slotting behind/around the existing handle using the silicon sealant supplied. In most instances, there is no need to remove the manufacturer’s internal door card either.
Favoured by many fleet operators, this is a very cost effective solution to a very common problem. Proplate offers an ideal deterrent helping to prevent break-ins but is equally suited for re-securing a door/s after a theft has been attempted.
Please note: Proplates available for all doors excluding tailgate.
Suitable for:-
Citroen Nemo
Citroen Berlingo 2008 On
Citroen Dispatch 2007 On
Citroen Relay Oct 2006 On
Fiat Fiorino
Fiat Scudo 2007 On
Fiat Doblo
Fiat Ducato Oct 2006 On
Merc Vito 2004 On
Merc Sprinter Pre 2006
Merc Sprinter 2006 On
Peugeot Bipper
Peugeot Partner 2008 On
Peugeot Expert 2007 On
Peugeot Boxer Oct 2006 On
VW LT
VW Crafter
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
| | Van Vault 3m Pipe Tube Carrier
Price: £124.99 (Excluding VAT at 17.5%)
The Universal Van Vault Tube - 3m Pipe Carrier.
Organised loading saves time during the working day and prevents unsafe loads.
Tough materials provide impact protection.
Fits standard roof racks and vehicles.
Aerodynamic design minimizes wind drag to optimise fuel efficiency and reduce noise.
Lightweight but tough materials provide impact protection.
Key locking end caps for front and rear access. Tamper proof fixings bolts to deter theft, 2 keys for each lock with spares available.
Spec -
Length 3m (3150.39mm overall)
Diameter 140mm
Weight 15Kg
Max Load 50Kg
Please allow 5 working days for delivery.
Free delivery on all orders.
Price excludes VAT at 17.5%
All images/pictures are for illustration purposes only.
find out more
| | Flettner 2000 Rotating Wind Driven Van Roof Air Vent Black
Price: £57.00 (Excluding VAT at 17.5%)
Black Flettner 2000 Rotating Wind Driven Van Roof Airvent.
The Flettner 2000 rotary vehicle vent provides round the clock ventilation for vans, buses, ambulances, 4x4s, boats and buildings.
Discrete, low-profile unit.
Tough polypropylene and glass reinforced nylon construction.
Stainless steel spindle and bearings.
Integral weather shield (prevents water ingress).
Complete with shutter.
Ultra reliable.
No maintenance required.
Complete with fitting guide.
The Flettner 2000 can be fitted to vehicles with ribbed roofs provided that the gap between each rib is at least 145mm (5.75in).
An alternative model, the Flettner TCX-2 with a narrow base option, can be fitted to roofs where the gap between ribs as small as 108mm (4.25in).
Free Delivery!
Click here to download flettner airvent trade price list.
Ref: FLETTNER 2000 BLACK
find out more
|
|
Rhino RP12 Roof Rack Aluminium 3M Pipe Carrier
Price: £108.50 (Excluding VAT at 17.5%)
Rhino Aluminium Pipe Carrier - 125mm Square Tube x 3 Metres Long With Locking Aerodynamic Nose Cones.
This unique pipe carrier is manufactured from light but strong powder coated aluminium tubing, combined with tough aerodynamic, glass reinforced plastic end cones, to ensure minimal wind drag and maximum style.
Both end cones are fitted with keyed alike, high quality stainless steel locking mechanisms.
The practical dimensions of our Rhino Pipe Tube allow up to 54 of 15mm copper tubes to be easily transported.
Internal Dimensions:-
Width - 125mm. Height - 125mm. Length - 3050mm.
Mounting hardware supplied with this pipe carrier is suitable for use on all brands of roof bar, providing the bar dimensions are no smaller than 30mm wide x 20mm deep and no larger than 50mm wide x 40mm deep.
Ref: RP12
find out more
| | Flettner TCX 2 Wind Driven Van Roof Rotating Air Vent Black 
Price: £57.00 (Excluding VAT at 17.5%)
Black Flettner TCX 2 Wind Driven Van Roof Rotating Airvent.
The Flettner TCX-2 roof vent represents the very latest generation of rotary ventilators.
The TCX-2 is designed and constructed to eliminate the entry of rain, dust and downdraughts.
The unit delivers maintenance-free performance with no electrical connections to worry about, no drain on batteries and no running costs. Round the clock ventilation is provided wherever there is a slight breeze even when a vehicle is parked or where a building has no power supply.
Installation onto the roof of a vehicle or building is simple, requiring only a single locking nut fixing (included) and a 98 mm (3.9 inch) vent aperture.
Simple to fit.
State of the art manufacturing.
High quality stainless steel bearings for incredibly smooth running Tough and durable polypropylene rotor head.
Cost-effective solution to the problems of excess heat and condensation.
Supplied with shutter.
Ultra reliable No maintenance required.
Complete with fitting quide.
Colour: Black.
Choice of Two Bases:-
Standard Base: (Circular - diameter 145mm / 5.75in).
Narrow Base: (Oval - width 108mm / 4.25in).
Please note: The rib patterns on the roofs of Ford Connects and Volkswagen VW T5 Transporter range of vans are such that the fitting of a Flettner ventilator should only be undertaken by a specialist fitter. We further recommend that the TCX-2 should not be fitted to smaller (car-derived) vans or to the Vauxhall Vivaro, Renault Trafic, Nissan Primastar. These vehicles should be fitted with the Flettner 2000 ventilator.
Please allow 5 working days for delivery.
Free delivery on all orders!
All images/pictures are for illustration purposes only.
Click here to download flettner airvent trade price list.
Ref: FLETTNER TCX2 BLACK
find out more | | Pipe Carrier 100 X 3000
Price: £92.00 (Excluding VAT at 17.5%)
100 X 3000 Aluminium Pipe Carrier
Padlocks Incl.
Ref: PLY89
find out more
|
|
Single And Double Front Van Seat Cover Set
Price: £33.45 (Excluding VAT at 17.5%)
Single And Double Front Van Seat Cover Set
Single and double front seat cover set suitable for most cars and vans.
Extremely strong, heavy duty water resistant seat covers. They are very well made and an excellent investment to protect your seats from a multitude of disasters!
Made from heavy duty high density nylon fabric.
Protects upholstery from dirt, grease, oil, water, food and drink.
Easily wiped clean.
Universal size.
Available in Grey or Blue and Black.
Elasticated Base and velcro sides for easy fitment.
Not suitable for seats with seat mounted air bags.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
| | Sentri Xlock 515 Van Tool Storage Security Box
Price: £175.00 (Excluding VAT at 17.5%)
Sentri Xlock 515 Van Tool Storage Security Box Manufactured by Sentribox.
Substantial construction from 1.5, 2mm sheet steel.
XLOCK The whole system operates with 1 key in 1 lock with 1 turn.
Guaranteed key difference of 1:6000. 2 keys per box. Every box has its own individual number for optional replacement key service.
Anti-jemmy bars all round.
Twin hydraulic arms and tool mat for every box.
Drop down recessed handles with rubber pads.
Covered power cable acess point for charging tools in the box.
Black powder coated finish.
Full width split heavy duty piano hinge welded to box and lid.
3 year manufacturers warranty against faulty workmanship.
Dimensions:-
Overall size - 1310mm L x 450mm H x 492mm W
Internal size - 1258mm L x 446mm H x 450mm W
Weight - 49kg
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more | | |
|
Steel Van Racking Unit SV1
Price: £303.00 (Excluding VAT at 17.5%)
Steel van internal racking system.
Spec:-
Unit height 1080mm.
Each Shelf (internal) 960x400x100mm.
3 shelves with dividers.
Lower front brace with open bottom.
Can be fitted over most van wheel arches.
Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
| | Steel Van Racking Unit SV2
Price: £314.00 (Excluding VAT at 17.5%)
Steel van internal racking system.
Spec:-
Unit height 1080mm.
Each Shelf (internal) 960x400x100mm.
2 shelves with dividers.
1 Top shelf with 4 removable plastic bins and document tray.
Lower front brace with open bottom.
Can be fitted over most van wheel arches.
Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
| | Steel Van Racking Unit SV3
Price: £334.00 (Excluding VAT at 17.5%)
Steel van internal racking system.
Spec:-
Unit height 1080mm.
Each Shelf (internal) 960x400x100mm.
Lower back slanted power tool / component case shelf.
3 shelves with dividers.
(power tools not included).
Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
|
|
Steel Van Racking Unit SV4
Price: £345.00 (Excluding VAT at 17.5%)
Steel van internal racking system.
Spec:-
Unit height 1080mm.
Each Shelf (internal) 960x400x100mm.
Lower back slanted power tool / component case shelf.
2 upper shelves with dividers.
1 Top tray with 4 removable plastic bins and document holder.
(power tools not included).
Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
| | Steel Van Racking Unit SV5
Price: £398.00 (Excluding VAT at 17.5%)
Steel van internal racking system.
Spec:-
Unit height 1080mm.
Each Shelf (internal) 960x400x100mm.
Lower back slanted power tool / component case shelf.
2 Lower shelves with dividers.
1 Upper tray with 4 removable plastic bins and document holder.
1 Top shelf with 6 removable plastic bins.
(power tools not included).
Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
| | Steel Van Racking Unit SV6
Price: £294.00 (Excluding VAT at 17.5%)
Steel van internal racking system.
Spec:-
Unit height 1080mm.
Each Shelf (internal) 960x400x100mm.
3 Lower back slanted power tool / component case shelf.
1 Upper shelf with dividers.
Lower front brace with open bottom.
Can be fitted over most van wheel arches.
Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
|
|
Steel Van Racking Unit SV7
Price: £360.00 (Excluding VAT at 17.5%)
Steel van internal racking system.
Spec:-
Unit height 1080mm.
Each Shelf (internal) 960x400x100mm.
4 shelves with dividers.
Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
| | Steel Van Workbench Racking Unit SV-WB
Price: £273.00 (Excluding VAT at 17.5%)
Steel van internal workbench racking system.
Spec:-
Work Bench Unit height 800mm.
Each Shelf (internal) 960x400x100mm.
2 shelves with dividers.
1 Work bench made from resin coated multilayer ply, with galvanised steel subframe.
Fully modular construction allows for easy assembly and varied choice of system configuration.
Fully Galvanized.
Designed to be as light-weight as possible without compromising strength.
Units can also be used as workshop racking.
Adjustable to allow fitting to most vans.
Supplied with universal fitting kit as standard.
Supplied in flat pack form.
Please allow 5 working days for delivery.
Free delivery on all orders.
All images/pictures are for illustration purposes only.
find out more
| | Vauxhall Combo Van Window Grilles & Blanks - Pre 2001
Price: £41.00 (Excluding VAT at 17.5%)
Pre 2001
Rear window grills & blanks are punched from a single sheet of steel and when fitted provide a deterrent to theft from vans. The security grilles & blanks are supplied in light grey polyester powder coated finish only.
Ref: PLY10
find out more
|
|
